Operating manual Universal Control Unit for Powder Spray Guns EPG-SPRINT XE
7 Operation
Order number 2354913 | Edition 10/2022
45
EPG
SPRINT X
0
%
100
%
kV
80
60
40
20
100
Tri
Cor
5
4
3
2
1
120
80
40
20
10
10
20
30
40
50
60
70
80
90
Ø
12
10
11
9
8
m /h
2.0
3.0
0.5
0.3
0.1
1.5
3
5.5
4.5
3.5
2.5
Tri
µA
P_01757
29
30
19
24
4
Press the [Current limitation] push button (29) approx. 2 seconds. Yellow LED (30)
flashes quickly. The actual current limitation value is shown in the LED display (19) for 5
seconds, the display returns to the previous display after this time. The actual value
display can also be interrupted before expiration of the 5 seconds by pressing a
selection button or turning the universal control dial (24).
7.6.8 Setting the U/I Characteristic Curves
kV
80
60
40
20
100
Tri
Cor
5
4
3
2
1
120
80
40
20
10
µA
P_01758
32
31
4
To change the characteristic slope, press the [Characteristic slope] button (31) once or
twice until the desired characteristic curve is shown in the [Characteristic slope] LED
display (32).
U/I Characteristics EPG-SPRINT XE
The user can choose from three characteristic curves to achieve optimum coating results.
These enable optimum electrostatic charging of the powder despite different powder
characteristics.
