GB
4
FIJI
Operating IInstructions
Congratulations on the purchase of your
WAGNER
FIJI. Read the operating
instructions carefully before using the equipment and observe the safety instructions.
Keep the operating instructions in a safe place.
NOTE:
The FIJI is weather-proof and should be used in direct sunlight. Install the
FIJI in such a way that the solar module is exposed to as much sunlight
as possible in order to ensure maximum efficiency.
FIJI is equipped with an NiCd rechargeable battery. This
battery is supplied uncharged. Before using for the first time, charge the
battery for five days in direct sunlight in order to achieve maximum power.
ASSEMBLY (Figure 1 - 3)
●
Carefully remove your FIJI and its accessories from the box.
●
Remove the solar module from the lamp unit.
●
Pull the orange-marked foil strip out of your FIJI.
Your FIJI is now ready for operation.
●
Plug the upright poles together in accordance with the desired height.
CAUTION! Do not exert pressure on the solar panel, as this may
cause damage to the solar module!
When digging and drilling holes, make sure that you do not
come into contact with hidden cables. Contact with hidden
cables can result in serious injury or even death!
INSTALLATION
Choose a site for installation with as much irradiation as possible. Do not place the
FIJI in the shade of trees, bushes or buildings, as this will greatly reduce the degree of
efficiency of the FIJI.
Technical data FIJI
Solar panel
Multi-crystalline
Output with full irradiation
approx. 160 mW
Rechargeable battery
NiCd
Voltage
1,2 V
Charging capacity
700 mAh
Lamp element
LED
Power input
50 mW
Light duration
max. 8 h
