5
FineSpray
GB
Assembly
For assembly, insert the spray attachment into the gun handle so that the two
arrows point at each other. Turn the gun handle 90° in the arrow direction until
it audibly engages. (Fig. 1)
To remove the spray attachment, push the catch (Fig. 1, A) beneath the trigger down and
turn the spray attachment by 90°.
For further information on setting the spray pattern and the correct spraying
technique refer to the instructions of the basic device.
Spare Parts (Fig. 2)
You cannot combine different-coloured parts of other attachments.
POS.
ORDER NO.
DESIGNATION
1
2321 877
FineSpray spray attachment (brown) complete
2
2321 868
Spray jet width adjusting lever (shaping air)
3
2314 591
Spray jet level adjusting ring (vertical/horizontal)
4
2332 579
Union nut (brown)
5
2317 820
Air cap
6
2314 585
Air screen
7
2317 667
Nozzle (R 1.8)
8
2323 934
Nozzle seal
9
2304 027
Non-return valve (Ventilating hose, valve cover, diaphragm)
10
0417 308
O-ring of spray attachment
11
2326 126
Body of gun R 1.8 (including position 8-10)
12
2319 223
Container seal
13
2319 222
Feed tube
14
2324 248
Fine feed tube filter (red, 5 pc.)
15
2322 451
Container with cover 1000 ml
2315 539
Lubricating grease
