19
FinishControl 3500
GB
TECHNICAL DATA/ INTRODUCTION/ PREPARING THE COATING MATERIAL
4
TECHNICAL DATA
The rating plate is underneath the air filter
c
over.
Voltage:
230 V~, 50 Hz
Power
c
onsumption:
700 W
Atomizing output:
220 W
Container volume:
1000 ml
Power
c
able:
4 m
Prote
c
tion
c
lass:
I
Sound pressure level:*
Un
c
ertainty K:
74 dB (A)
4 dB (A)
Sound pressure output:*
Un
c
ertainty K:
87 dB (A)
4 dB (A)
Os
c
illation level:
Un
c
ertainty K:
<2.5 m/s²
1.5 m/s²
Weight (motor-operated blower
and spray gun):
2.3 kg
* The a
c
ousti
c
emission value was as
c
ertained in a
cc
ordan
c
e
with EN 50144-2-7:2000
5
INTRODUCTION TO SPRAYING
USING THE XVLP PROCEDURE
XVLP (E
x
tra
V
olume
L
ow
P
ressure) is a low pressure spraying
te
c
hnique, whi
c
h works with a high volume of air and a low air
pressure. The greatest advantage of this spraying te
c
hnique
is the low paint mist formation. This redu
c
es the amount re-
quired to
c
over the obje
c
t to a minimum.
As opposed to
c
onventional appli
c
ation of
c
oatings, this
method a
c
hieves a highly e
c
onomi
c
al and perfe
c
t surfa
c
e
quality and is, at the same time, environmentally friendly.
Function description
The paint spraying system
c
onsists of a motor-operated tur-
bo-blower, whi
c
h provides the spray gun with atomisation air.
In the spray gun, a part of the atomisation air is used to pres-
surise the
c
ontainer. This pressure
c
auses the
c
oating material
to be fed through the uptake pipe to the nozzle where it is
atomised by the rest of the atomisation air.
All settings ne
c
essary for operation (e.g. material volume)
c
an
be
c
onveniently made, dire
c
tly on the gun.
Field of application
The FC 3500 is designed for smaller to medium-sized proje
c
ts,
i.e. for surfa
c
es of a
maximum of 50 m²
.
6
COATING MATERIAL
6.1 COATING MATERIALS SUITABLE FOR USE
Solvent-based and water-soluble la
c
quer paints
Mordants, glazes, impregnations, oils,
c
lear varnishes, syn-
theti
c
enamels,
c
oloured paints, alkyd resin varnishes, prim-
ers, radiator paints, hammer effe
c
t enamels, anti-rust paints,
spe
c
ial-effe
c
t paints, textured paints
6.2 COATING MATERIALS NOT SUITABLE FOR USE
Materials that
c
ontain highly abrasive
c
omponents, fa
c
ade
paint,
c
austi
c
solutions and a
c
idi
c
c
oating substan
c
es.
Flammable materials.
6.3
COATING MATERIALS THAT CAN ONLY BE
PROCESSED WITH RELEVANT SPRAY
ATTACHMENT
(ACCESSORIES)
Interior wall paint (dispersions and latex paint)
6.4
PREPARING THE COATING MATERIAL
Observe the manufa
c
turer’s instru
c
tions for the
use of the
c
oating material on the paint tin or on
the te
c
hni
c
al instru
c
tion sheet.
Coating material purity:
An absolute pre-
c
ondition for the trouble-free operation of
the fine-spray system is that the
c
oating material is un
c
on-
taminated. If you have doubts as to the purity of the
c
oating
material, we re
c
ommend that you first filter it through a fine
sieve.
Processing the coating material with the StandardSpray
spray attachment (yellow)
Coating Material
Processing
Comments
Solvent-based la
c
-
quer paints
observe manufa
c
-
turer’s instru
c
tions
Water-soluble la
c
-
quer paints
observe manufa
c
-
turer’s instru
c
tions
