WAGNER FinishControl 5500, Operating Manual

5

FinishControl 5500

EN

2 

EXPLANATORY DIAGRAM (FIG. 1)

3 

THE WAGNER CLICK&PAINT SYSTEM

POS. DESIGNATION

1

Spray attachment complete

2

Spray jet width adjustment

3

Air cap (to set the working direction)

4

Ventilating hose

5

Valve

6

Container seal

7

Suction tube

8

Container

9

Trigger (actuates turbine starting switch 





 material is 

conveyed)

10

Material volume regulation

11

Air volume control

12

Air hose

13

Gun handle

14

Carry handle

POS. DESIGNATION

15

ON/OFF switch

(I = ON, 0 = OFF)

16

Air filter indicator ((lights up red if the main air filter is 

blocked)) 

17

Air hose connection

18

Storage compartment for small parts / accessories

19

Gun mounting

20

Clamp for securing the coiled power cable

21

Power cable

22

Air filter cover (left and right)

23

Fastening strap for binding the rolled-up air hose to-

gether

24

Fine feed tube filter (red) 

Coarse feed tube filter (white)

25

Cleaning brushes (4 pcs.)

With the Wagner Click&Paint System, the front part of the gun (spray attachment) can be replaced quickly and easily. 

This enables a rapid material change without cleaning, and ensures that the right tool is available for every material and applica-

tion.

The following spray attachments are available:

Spray attachment

Area of application

StandardSpray (yellow) 

Order No. 2430386

Spray attachment with slit nozzle and 1000 ml aluminium container. Processes all standard paints. 

FineSpray (brown) 

Order No. 2430385

Spray attachment with round nozzle and 1000 ml aluminium container. Ideal for low-viscosity paints 

and glazes.

WallSpray (white) 

Order No. 2430387

Dispersion spray attachment with slit nozzle and 1400 ml plastic container. Designed for processing 

dispersions.

3.1 

DISASSEMBLY OF THE SPRAY GUN

For assembly, insert the spray attachment into the gun handle so that the two arrows point at each other. Turn the gun handle 

90° in the arrow direction until it audibly engages. (Fig. 2)

To remove the spray attachment, push the catch (Fig. 2, A) beneath the trigger down and turn the spray attachment by 90°.

EXPLANATORY DIAGRAM/ CLICK&PAINT SYSTEM