background image

Español

Français

English

52

 

© Wagner Spray Tech - All Rights Reserved

Limited Warranty - HVLP paint spray equipment

This product, manufactured by Wagner Spray Tech 

Corporation (Wagner), is warranted against defects 

in material and work-manship for one year following 

date of purchase if operated in accordance with 

Wagner’s printed recommendations and instructions. 

This warranty does not cover damage resulting from 

improper use, accidents, user’s negligence or normal 

wear.  This warranty does not cover any defects or 

damages caused by service or repair performed by 

anyone other than a Wagner Authorized Service 

Center.

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR 

FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO 

one year FOLLOWING DATE OF PURCHASE. WAGNER 

SHALL NOT IN ANY EVENT BE LIABLE FOR ANY 

INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY 

KIND, WHETHER FOR BREACH OF THIS WARRANTY 

OR ANY OTHER REASON. THIS WARRANTY DOES NOT 

APPLY TO ACCESSORIES.

THIS PRODUCT IS DESIGNED FOR HOME USAGE ONLY. 

IF USED FOR COMMERCIAL OR RENTAL PURPOSES, 

THIS WARRANTY APPLIES ONLY FOR 30 DAYS FROM 

DATE OF PURCHASE.

If any product is defective in material and/or 

workmanship during the applicable warranty period, 

return it with proof of purchase, transportation 

prepaid to any Wagner Authorized Service Center. 

(Service Center listing is enclosed with this product.) 

Wagner’s Authorized Service Center will either repair 

or replace the product (at Wagner’s option) and return 

it to you, postage prepaid.

SOME STATES DO NOT ALLOW LIMITATIONS ON 

HOW LONG AN IMPLIED WARRANTY LASTS OR THE 

EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL 

DAMAGES, SO THE ABOVE LIMITATION AND 

EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY 

GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY 

ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE 

TO STATE.

Garantie limitée  - Pulvérisateur de peinture HVLP

Cet article fabriqué par Wagner Spray Tech 

Corporation (Wagner) est garanti contre tout défaut 

de fabrication et de matériaux pour une période 

d’un an suivant la date d’achat, à condition qu’il soit 

utilisé conformément aux recommandations et aux 

instructions écrites de Wagner. La garantie ne couvre 

pas les dommages résultant d’un mauvais emploi, d’un 

accident, d’une négligence de la part de l’utilisateur 

ou de l’usure normale de l’article. Elle ne couvre pas 

non plus les défauts ou les dommages découlant 

de services d’entretien ou de réparations assurées 

par tout autre établissement qu’un centre de service 

après-vente agrée de Wagner.

TOUTE GARANTIE TACITE RELATIVE AUX QUALITÉS 

MARCHANDES OU À L’UTILISATION DE CE PRODUIT 

DANS UN BUT PARTICULIER N’EST VALABLE QUE 

POUR UNE PÉRIODE D’UN AN À COMPTER DE LA 

DATE D’ACHAT. WAGNER NE SAURAIT ÊTRE TENU 

RESPONSABLE DES DOMMAGES FORTUITS OU 

INDIRECTS QUELS QU’ILS SOIENT, QUE CE SOIT POUR 

INOBSERVATION DE LA PRÉSENTE GARANTIE OU POUR 

TOUTE AUTRE RAISON. LA GARANTIE NE COUVRE PAS 

LES ACCESSOIRES.

CET ARTICLE A ÉTÉ CONÇU EXCLUSIVEMENT EN VUE 

D’UN USAGE DOMESTIQUE. LA GARANTIE NE SERA 

VALABLE QUE POUR 30 JOURS À COMPTER DE LA 

DATE D’ACHAT DE L’ARTICLE EST UTILISÉ À DES FINS 

COMMERCIALES OU DE LOCATION.

Tout article comportant des défauts de fabrication 

ou de matériaux au cours de la période de garantie 

applicable peut être retourné en port payé à un centre 

de service après-vente agrée de Wagner, accompagné 

de la preuve d’achat (une liste des centres de service 

après-vente accompagne cet article). Le centre de 

service après-vente agrée de Wagner vous renverra 

l’article en port payé, après l’avoir réparé ou remplacé 

(ce choix étant à la discrétion de Wagner).

COMME LES LIMITES DE TEMPS RELATIVES À UNE 

GARANTIE TACITE OU À L’EXCLUSION DES DOMMAGES 

DE NATURE FORTUITE OU INDIRECTE N’ONT PAS 

NÉCESSAIREMENT COURS DANS TOUTES LES 

PROVINCES, IL SE PEUT QUE LESDITES LIMITES OU 

EXCLUSIONS NE VOUS CONCERNENT PAS. CERTAINS 

DROITS PARTICULIERS VOUS SONT DÉVOLUS EN 

VERTU DE LA PRÉSENTE GARANTIE ET PEUVENT 

S’ACCOMPAGNER D’AUTRES DROITS EN FONCTION DE 

LA PROVINCE OÙ VOUS RÉSIDEZ.

Garantía limitada  - Equipo de atomización de 

pintura HVLP

Este producto, fabricado por la Wagner Spray Tech 

Corporation (Wagner), está garantizado contra 

defectos de materiales y de mano de obra por un 

año a partir de la fecha de compra siempre y cuando 

se utilice de acuerdo con las recomendaciones e 

intrucciones impresas de Wagner.  Esta garantía 

no cubre daños ocasionados por el uso incorrecto, 

accidentes, negligencia por parte del usario o el 

desgaste normal.  Esta garantía no cubre cualquier 

defecto o daño ocasionado por el servicio o las 

reparaciones llevadas a cabo fuera de un Centro de 

Servicio Wagner Autorizado.

CUALQUIER GARANTÍA IMPLÍCITA RFERENTE AL 

POTENCIAL COMERCIAL O ADAPTABILIDAD pARA 

UN USO PARTICULAR SE LIMITA A UN AÑO A PARTIR 

DE LA FECHA DE COMPRA.  WAGNER EN NINGÚN 

CASO SERÁ RESPONSABLE DE CUALQUIER DAÑO 

DIRECTO O INDIRECTO DE CUALQUIER TIPO, YA SEA 

POR VIOLACIÓN DE ESTA GARANTÍA O CUALQUIER 

OTRA RAZÓN.  ESTA GARANTÍA NO SE APLICA A LOS 

ACCESORIOS.

ESTE PRODUCTO ESTÁ DISEÑADO PARA SER 

UTILIZADO EN EL HOGAR ÚNICAMENTE.  SI SE UTILIZA 

PARA PROPÓSITOS COMERCIALES O DE ALQUILER, 

ESTÁ GARANTÍA ES VÁLIDA ÚNICAMENTE DURANTE 30 

DÍAS A PARTIR DE LA FECHA DE COMPRA.

Si cualquier producto está defectuoso con respecto a 

los materiales o mano de obra, regréselo porte pagado 

junto con el recibo de compra a cualquier Centro de 

Servicio Wagner Autorizado (la lista de Centros de 

Servicio se adjunta con este producto).  El Centro de 

Servicio Wagner Autorizado reparará o reemplazará el 

producto (a la discreción de Wagner) y se lo regresará 

porte pagado.

ALGUNOS ESTADOS, DEPARTAMENTOS O PROVINCIAS 

NO PERMITEN LIMITACIONES EN CUANTO AL PERÍODO 

DE VALIDEZ DE UNA GARANTÍA IMPLÍCITA NI LA 

EXCLUSIÓN DE DAÑOS DIRECTOS O INDIRECTOS.  POR 

LA TANTO, LA LIMITACIÓN Y LA EXCLUSIÓN ANTERIOR 

PUEDEN NO APLICARSE A USTED.

ESTA GARANTÍA LE OTORGA DERECHOS LEGALES 

ESPECÍFICOS Y USTED TAMBIÉN PUEDE TENER OTROS 

DERECHOS QUE VARÍAN DE UNA LOCALIDAD A OTRA.

Summary of Contents for flexio 690





















Reviews: