12
EN
Storage
Allow the heat gun nozzle to cool to room temperature before placing in
storage.
The nozzle will turn dark over time because of the high heat. This is
normal and will not affect the performance or life of the unit.
accessories
The following accessories may come with the heat gun or may be
purchased separately by calling 1-800-727-4023.
Concentrator
P/N 2366222
Directs a concentrated
heat flow to the
work surface. Ideal
for removing paint
in awkward corners,
crevices, mouldings,
beading or architraves.
Glass Protector
P/N 2366224
Deflects the heat
away from glass or
other fragile areas.
Ideal for window
sills, ledges, frames
and skirting
boards.
Flare
P/N 2366223
Directs a long, narrow
heat pattern to the
work surface. Ideal
for removing paint
or varnish from large,
flat surfaces such as
skirting boards, doors,
stairs, etc. It should be
used in conjunction
with a flat scraper.
Curved Deflector
P/N 2366225
Disperses the heat
flow evenly around
the whole work
surface. Ideal for
thawing frozen
pipes, solder pipe
work, bending
plastics or heat
shrinking electrical
insulating tubing.
1
4
2
3
5-in-1 tool
P/N 2366227
The blade (1) is used to scrape paint
and spread compound. The gouge
point (2) is used to remove putty/caulk
and the curved area (3) is used to clean
roller covers. Flat side (4) can also be
used to open paint cans.
Case
P/N 2366226
The heat gun case has been specifically
designed to locate the heat gun in the
upright position for work on uneven
surfaces.
IMPOrTaNT: always use gloves when handling the heat gun.
To attach a nozzle to the gun:
1. Set the heat gun upright on a level surface until the tip is cool.
2. Set the item onto the tip of the heat gun and push firmly into place
by hand.
To remove a nozzle:
1. Set the heat gun upright on a level surface until the tip is cool.
2. Pull the item off of the tip.
Summary of Contents for FURNO 700
Page 37: ...ES 37 ...
