37
GA 2800EA, GA 2805EA
"?
12
11
13
14
15
15
B_00141
OPERATING MANUAL
EDITION 12/2008
PART NO. DOC350731
8.4
ELECTRODE REPLACEMENT
Electrode
If the electrode is damaged (bent or broken) by incorrect handling, the valve needle head
(12) must be replaced.
1. Remove valve rod as described in paragraph 8.2.
2. Carefully clamp the valve rod extension (11) and pull off the needle head (12) using
small pliers.
3. Manually press the new needle head (12) onto the resistor housing (13).
Note
For easier assembly fi t the valve needle with the electrode pressed into a cork.
4. Refi t valve rod as described in paragraph 8.2.
#!54)/.
$EFECTIVESEALINGSURFACE
%QUIPMENTDAMAGETOTHEGUN
#OATINGERROR
$ONOTDAMAGETHESEALINGSURFACE
3)()??'"
(15)
#!54)/.
#ONTACTSPRINGINCORRECTLYlTTED
0OORCOATINGRESULT
%NSURETHATCONTACTSPRING ENGAGES
3)()??'"
