23
GA 4000ACIC
"?
OPERATING MANUAL
EDITION 06/ 2011
PART NO. DOC2312956
With the AirCoat round jet process the spray material is atomized at a pressure of 3-12 MPa;
30-120 bar; 435-1740 psi.
The air at 0.05-0.25 MPa; 0.5-2.5 bar; 7.2-36 psi produces a soft jet (used standard). The
spray jet can be adjusted by turning the nozzle nut.
The multi-channel swirl nozzle produces fi ne paint particles, while at the same time reducing
their forwards speed and swirling them to produce a rotating motion. The result is a soft,
extremely well atomized spraying cloud.
Nozzle nut
Spray jet
Multi-channel swirl nozzle
AirCoat Air
Spray material
AirCoat Air
Advantages:
•
High painting capacity
•
Low fogging tendency
•
Good fi nish
•
High viscosity paints can easily be applied
4.5.2
AIRCOAT ROUND JET SPRAY PROCESS