28
GA 4000ACIC
OPERATING MANUAL
EDITION 06/ 2011
PART NO. DOC2312956
5.3
STARTING-UP
➞
Observe
safety instructions
in chapter 2.
The following rules must be observed before all work on the unit, in the event of work
interruptions and functional faults:
SIHI_0065_GB
WARNING
Unintentional putting into operation!
Risk of injury
Before all work on the unit, in the event of work interruptions and
functional faults:
Switch off the energy/compressed air supply.
Relieve the pressure from the spray gun and unit.
Secure the spray gun against actuation.
By functional faults: Identify and correct the problem, proceed
as described in chap „Trouble shooting“.
SIHI_0064_GB
CAUTION
Solvent in air conduit!
Problems
By cleaning the spraygun use with min. 0.05 MPa; 0.5 bar; 7.25 psi shaping air.
Cleaning solvent must not get into the air ducts.
5.3.1
GENERAL RULES FOR HANDLING THE SPRAY GUN