16
GM 4100AC
C
D
E
F
G
K
A
H
J
L
I
M
B
B_02259
OPERATING MANUAL
EDITION 12/2008
PART NO. DOC394821
5
STARTING UP AND OPERATING
5.1.1
TYPICAL AIRCOAT SPRAYING SYSTEM
A
Paint-pump
B
Compressed air shut off valve
C
Pressure regulator
D
Air pressure regulator with fi lter
E
Earthing cable
F
Air hose, el. conductive
The pray gun GM 4100AC must be used a part of a spraying system. The spraying system
shown in the fi gure is only one example of an Aircoat spraying system. It is not an actual
system design. Contact your Wagner distributor for assistance in designing a system to
meet your needs.
The operating instructions and the safety regulations for the additional system compo-
nents used must be read before starting-up.
5.1
INSTALLATION AND CONNECTION
WARNING
Incorrect installation/operation!
Risk of injury and damage to equipment
When putting into operation and for all work, read and follow
the operating instructions and safety regulations for the addi-
tionally required system components.
SIHI_0050_GB
G
AirCoat gun
H
HV-paint hose
I
HV-fi lter/Relief valve
J
Relief
K
Stand trolley
L
Suction system
M
Compressed air main