72
4
5
B_04793
SW9
1.8 Nm
2
3
(1)
(4)
0.1 Nm
B_04379
11
12
10
OPERATING MANUAL
EDITION 05/2015
ORDER NUMBER DOC2319150
Ensure the correct
insertion position.
1. Move the valve rod to the rear position
so that the sealing area does not become
scratched (1).
2. Slightly tighten AC valve tip (2) by hand
3 fi ngers) using an assembly tool.
3. Use assembly tool, socket or ring spanner
(no open-end wrench) to tighten the valve
housing (3).
4. Slide the valve rod to the forward position
(at the valve seat) (4).
Valve needle assembly tool,
Order no. 2309368
Ensure the correct
insertion position and
installation direction.
Clamping screw assembly tool,
Order No. 2325263
Gold contact sleeve (10)
Check whether the gold contact
sleeve is located in the end piece (11).
Otherwise, insert the sleeve onto the
resistance (12).
Summary of Contents for GM 50000EAC
