17
GM 5000EA
OPERATING MANUAL
EDITION 07/2014
ORDER NUMBER DOC
2344499
4.6
NOTES TO GERMAN REGULATIONS AND GUIDELINES
Electrical devices and equipment
Part 2, Chapter 2.36 Working with Liquid Ejection Devices
Part 2, Chapter 2.29 Working with Coating Products
Explosion protection rules
Avoiding ignition risks
Equipment for cleaning work pieces with solvents
Guidelines for liquid ejection devices
Painting rooms and equipment
Electrostatic coating
Plant Safety Ordinance
Note:
All titles can be ordered from Heymanns Publishing House in Cologne, or they
can be found on the Internet.
4.3
CORRECT USE
WAGNER accepts no liability for any damage arising from incorrect use.
Use the device only to work with the products recommended by WAGNER.
Only operate the device as a whole.
Do not deactivate safety fi xtures.
Use only WAGNER original spare parts and accessories.
4.4
SAFETY INFORMATION ON DISCHARGES
The plastic parts of the spray gun are charged electrostatically by the high-voltage fi eld of
the spray gun. In case of contact with plastic parts harmless discharges (brush discharges)
may occur. They are completely non-hazardous for human health.
When keeping a distance of 4 to 10 mm; 0.15 to 0.4 inch between spray gun and object
to be sprayed, the corona discharge at the end of the electrode is visible during darkness.
4.5
USE IN AN EXPLOSION HAZARD AREA
In explosion hazard areas only use approved explosion-proof electrical devices.