WAGNER HVLP, Operating Instructions Manual

GB

6

HVLP handle extension

Tips for use. 

When working on lying objects: Turn the suction tube forwards. (Fig. 5 A)     

• 

Spraying work when working on overhead objects: Turn the suction tube rearwards.

(Fig. 5 B)

Attention! Only hold the handle extension at the grips provided when 

the unit is switched on. Touching the tension cable can accidentally 

trigger the gun.

i

You will find further information on spraying technique, regulation of 

material and air flow and also general information in the Operating 

Instructions for the basic unit.

Taking Out of Operation and Cleaning

Proper cleaning is the prerequisite for problem-free operation of the paint application 

device. No warranty claims are accepted in case of improper or no cleaning.

Turn off the machine and remove the plug. 

1) 

Press the hook (Fig. 2 "click") slightly downwards. Remove the front section of the 

2) 

gun. 

Remove the handle extension from the gun handle in the same way. 

3) 

Attention! The handle extension is only solvent resistant to a limited 

extent.  

Do not immerse in solvent, only wipe. 

Remove the handle extension and if required wipe it with a cloth soaked with water 

4) 

or solvent. 

i

To clean the front section of the gun please follow the instructions in 

the Operating Instructions for the basic unit. 

i

For easier assembly of the components after cleaning please apply 

lubricating grease (enclosed) to the O-rings on the front section of the 

gun and the handle extension 

Spare Parts List (Fig. 6)

Pos.

Designation

Order No.

1

 Rear section

2307 503

2

 Front Section

2307 505

3

 Spring

0417 316

 Lubricating grease

9892 550

The new CLICK&PAINT SYSTEM with additional spray attachments and accessories
offers the right tool for each work.