Start
1
Clean the
Spray Gun
Filter
What you’ll need
•
Wrench
•
Warm, soapy water for latex
material
•
Mineral spirits for oil based
materials
•
Replacement spray gun filter
(if necessary)
5.
Remove filter from housing
9.
Reassemble spray gun
8.
Replace cleaned filter, tapered end first,
into gun housing.
Note:
It is important to place
tapered end first to ensure proper sprayer
operation
7.
Inspect
filter for
damage and
replace if rips
are found
IMPORTANT:
Never clean
filter by poking with sharp
object.
Perform Pressure
Relief Procedure
Page 7
6.
Clean with appropriate
cleaning solution for material
being used; warm, soapy water
for latex material and mineral
spirits for oil based material
3.
Pull trigger guard to separate from filter
housing
PULL
4.
Unscrew filter housing using
a wrench
2
5
6
9
8
7
3
4
English
15
Tips if Experiencing Spray Issues
• Clean the Spray Gun Filter
Tips if Experiencing Spray Issues