39
PEA-C4-HiCoat
3
2
1
P_00597
3
1
2
Y
X
P_00598
Y
X
P_00599
OPERATING MANUAL
VERSION 05/2012
ORDER NUMBER DOC 390829
Procedure:
1.
Guide protective wedge 2 into wedge
tool 1.
2.
Insert both parts into opening on
electrode holder until they stop.
3.
If it is not possible to push the wedge
tool in as far as the mark X, rotate
the wedge tool a little until it can be
pushed up to the mark.
The mark X must be fl ush with the end
Y of the electrode holder.
4.
The protective wedge is now correctly
assembled and the wedge tool can be
pulled out of the electrode holder.
The protective wedge remains inserted
in the electrode holder.
Note:
The same wedge tool is used to insert the protective wedge.
1 Wedge tool
2 Protective wedge (when positioned)
3 Electrode holder (cut open view)
