44
PEA-C4-HiCoat
7
12
11
10
8, 9
P_01618
A2
X
A1
B1
Y1
Y2
Z
B2
OPERATING MANUAL
VERSION 05/2012
ORDER NUMBER DOC 390829
4.
Unscrew threaded sleeve 8 and locking sleeve
9 with mounting tool 10.
5.
Pull out connecting element 11 of angle
adapter 12.
6.
Insert screwdriver into open area X and turn it
until the nozzle insert 7 becomes loose.
7.
Pull out nozzle insert 7.
8.
Replace the wearing parts with new
components.
9.
Clean all components thoroughly and remove
any powder residues.
10.
Install nozzle insert 7 as shown in loupe Y1 and
Y2 in such a way that the pin B1 is guided into
the hole A1.
11.
Install connecting element 11 within the angle
piece 12 as shown in loupe Z in such a way that
the pin B2 is guided into the hole A2.
12.
Screw threaded sleeve 8 and locking sleeve 9
with mounting tool 10 and tighten them well.
Take care that it is still possible to turn easily
the threaded sleeve 8.
13.
Install electrode holder 5 together with nozzle
6 in the nozzle insert 7.
14.
Place cap nut 4 and tighten it well.
15.
Mount again the angle adapter to the gun.
