45
PEA-C4-HiCoat
B
1
A
C
2
3
G
E
F
D
P_00702
OPERATING MANUAL
VERSION 05/2012
ORDER NUMBER DOC 390829
8.7
MOUNTING THE CORONA-STAR
The Corona-Star is a Retrofi t-Set for the spray gun, which helps to achieve a better surface
quality (reduction of "orange peel").
Procedure:
1.
Switch off the high-voltage and the powder
feed and secure against inadvertent switch
on.
2.
Unscrew the standard nut A from the spray
gun housing B.
3.
Screw the new nut C for the Corona-Star D
onto the spray gun housing and fasten in
place.
4.
Fasten the cable guide onto the cover plate F
by using the screw E.
5.
Slide the Corona-Star G onto the spray gun
housing B.
Note:
Check whether the grounding is assured.
6.
The spray gun is ready for use again.
Danger from electric current!
Risk of injury and damage to the device.
Only trained personnel may modify the Corona-Star.
Prior to mounting the Corona-Star, the high-voltage and
the powder feed must be switched off and secure against
inadvertent switch on.
WARNING
