Maintenance and cleaning
5.2
Cleaning the spray gun and replacing the wearing parts
0412_Verschleissteile.doc
1
3
5
2
peac4_em_0005
•
Unscrew the outer nut
1
from the spray gun housing
5.
•
Pull the fan spray nozzle
2
off the electrode holder
3.
•
Carefully pull the electrode holder
3
out of the spray
gun housing
5.
Caution
When pulling out and inserting the electrode holder, ensure that the insert is not
damaged!
•
Remove powder residue from the parts removed and from the spray gun.
Caution
Never place the spray gun or parts of the spray gun in cleaning agent!
5.3
C4 Enamel Powder tube assembly instructions
B_00003
2
1
0390950
4
Assembly steps:
•
Mount nozzle system.
•
Insert the powder tube (1) into the cover
plate (3) and screw it into place until the
fan spray nozzle (4) is difficult to turn.
•
The stop on the powder tube (1) on the
electrode holder (2) limits the screw-in
depth.
B_00002
3
X
Please note:
The distance between the hose nipple and
the cover plate (3) is determined by the
screw-in depth of the nozzle body.
The measurement X results from the
installation.
05/2007
0390860
– PEA-C4-HiCoat- Enamel
17
