8
PEM-C4-Ergo
.
0102
OPERATING MANUAL
VERSION 02/2009
ORDER NUMBER DOC2305054
2.3
USING IN ACCORDANCE WITH THE INSTRUCTIONS
7!'.%2ACCEPTSNOLIABILITYFORANYDAMAGEARISINGFROMINCORRECTUSE
5SETHEUNITONLYTOWORKWITHTHEMATERIALSRECOMMENDEDBY7!'.%2
/PERATETHEUNITONLYASANENTIREUNIT
$ONOTDEACTIVATESAFETYEQUIPMENT
5SEONLY7!'.%2ORIGINALSPAREPARTSANDACCESSORIES
2.2.5
HANDLING POWDER PAINTS
Take note of the processing regulations laid down by the manufacturer of the powder
paint being used, when preparing or processing the powder.
Take note of the manufacturer’s advice and the relevant environmental protection
regulations when disposing of powder paints.
Implement the prescribed safety measures, in particular the wearing of safety glasses
and safety clothing as well as the use of protective hand cream.
Use dust masks or breathing apparatus.
To ensure sufficient protection of health and the environment, only operate the device
in a powder booth or at a spray wall with activated ventilation (exhaust air).
2.4.1
USING IN ACCORDANCE WITH THE INSTRUCTIONS
2.4.2
EXPLOSION PROTECTION IDENTIFICATION
2.4
FOR USE IN POTENTIALLY EXPLOSIVE AREAS
II 2 D EEx 2mJ 85°C
CE: Communautés
Européennes
Ex:
Symbol for explosion protection
II:
Unit class II
2:
Category 2 gun
D: Ex-atmosphere
dust
2mJ: max.
fi ring power 2 mJ
85°C:
max. surface temperature
This type A-P powder electrostatic gun is suited to processing industrial powder paints for
coating electro-conductive objects and can be used in potentially explosive atmospheres.
(See explosion protection identifi cation).
