Operating manual Powder Cup Gun PEM-X1 CG
7 Operation
28
Order number 2326960 | Edition 10/2022
7.5 DOUBLE CLICK PROGRAM (HIGH DYNAMIC REMOTE)
This function is used to change quickly to another program during a coating operation. The
operator can access a previously set program by double-clicking on the trigger lever on the
manual gun, for example to recoat parts using different parameters (high-voltage, current
limitation, air volumes etc.).
To access the function, press the trigger lever on the manual gun twice in quick succession
and hold down. Upon releasing the trigger, the original program will be returned to.
2x
P_01733
2x
2x
kV
80
60
40
20
100
Tri
Cor
5
4
3
2
1
120
80
40
20
10
µA
2x
2x
kV
80
60
40
20
100
Tri
Cor
5
4
3
2
1
120
80
40
20
10
µA
2x
2x
kV
80
60
40
20
100
Tri
Cor
5
4
3
2
1
120
80
40
20
10
µA
7.6 SWITCHING OFF THE MANUAL GUN
When releasing the trigger, the powder feed is stopped and the high voltage switched off.
To safely switch off the manual gun, e.g., for maintenance work, the control unit must be
switched off.
