F
14
ProjectPro 213 Extra
GB
14
ProjectPro 213 Extra
3. Safety of Persons
Be attentive. Pay attention to what you are doing and work sensibly with
a)
apower tool. Do not use the tool if you are tired or under the influence of
drugs, alcohol or medication.
Just a moment of inattentiveness while using the
tool can lead to serious injuries.
Wear personal safety equipment and always wear safety goggles
b)
Wearing
personal protective equipment, such as dust mask, non-slip safety shoes, safety helm
or ear protection, depending on the type of power tools, reduces the risk of injury.
Avoid accidental starting-up. Ensure that the switch is in the "OFF" position
c)
before inserting the plug into the socket.
Accidents can occur if you carry the
power tool while your finger is on the switch or if you connect the power tool to the
power supply which it is on.
Remove setting tools or wrenches before switching on the power tool.
d)
A tool
or wrench that is in a rotating tool part can lead to injuries.
Do not overestimate your abilities. Ensure that you are standing securely
e)
and have your balance at all times.
This ensures that you can control the tool
better in unexpected situations.
Wear suitable clothing. Do not wear wide clothing or jewelry. Keep yourhair,
f)
clothes and gloves away from moving parts.
Loose clothing, jewelry or long hair
can be caught in moving parts.
This appliance is not intended for use by persons (including children) with
g)
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
4. Careful Handling and Use of Power Tools
Do not overload the tool. Use the power tool designed for the work that you
a)
are doing.
You work better and safer in the specified performance range if you use
the suitable power tool.
Do not use power tools whose switch is defective.
b)
A power tool that cannot be
switched on or off is dangerous and has to be repaired.
Remove the plug from the socket before carrying out tool settings, changing
c)
accessories or putting the tool away.
This precautionary measure prevents
unintentional starting of the tool.
Store unused power tools so that they are inaccessible to children. Donot
d)
let persons use the tool who are not familiar with it or who have not read
these instructions.
Power tools are dangerous when they are used by inexperienced
persons.
Take proper care of your tools. Check whether the moving parts
e)
functiontrouble-free and do not jam, whether parts are broken or damaged
so that the tool function is impaired. Have damaged parts repaired before
