F
16
ProjectPro 213 Extra
GB
16
ProjectPro 213 Extra
Before working on the spray gun remove the power plug from the socket.
•
Cover areas that are
•
not to be sprayed. When working keep in mind that wind, for example,
may transport paint mist over great distances and cause damage.
The units may only be used with a functional valve.
•
If paints rises in the ventilating
hose (Fig. 12 A, item 14) do not operate the unit further! Dismantle and clean the
ventilating hose, valve and diaphragm and replace the diaphragm if necessary.
Do not lay the spray gun.
•
The device is equipped with a thermal release which disconnects the device in case of
•
overheating. In this case, turn off the device, remove the plug and let the device cool
down for at least 1/2 hour. Eliminate the cause of heating, e.g. bent hose, soiled air filter,
slots for air intake covered.
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fulfilled.
Technical Data
Max. viscosity
170 DIN-s
Max. flow rate
240 g/min
Power source
230 - 240 V
~
Power consumption
570 W
Atomizing output:
130 W
Double insulation
Sound pressure level
80 dB (A)
Oscillation level
< 2,5 m/s
Air hose length
7,5 m
Weight
13,6 kg
TechnDat_GB
Description (Figs. 1+2)
Air cap
1)
Tip
2)
Union nut
3)
Standard spray attachment
4)
Trigger guard
5)
Material volume regulation
6)
Gun handle
7)
Air volume control
8)
ON/OFF switch
9)
Air hose
10)
Frame
11)
Frame carry handle
12)
Frame cover/ Gun holder
13)
Air hose retainer
14)
Fastening belts for air hose
15)
Basic device cover
16)
Basic device closure
17)
Main switch
18)
Air hose connection
19)
Frame base
20)
Basic device
21)
Frame closure
22)
Container
23)
Valve
24)
Ventilating hose
25)
Fastener for radiator/detail spray
26)
attachment (accessory
Deposition tray for hardware
27)
Cover of air filter compartment
28)
Air filter
29)
Cable grommet
30)
Power cable
31)
Rubber band
32)
Deposition tray for spray attachments
33)
