9
EN
ProSpray 3.20
DESCRIPTION OF UNIT / STARTING OPERATION
4.3
TECHNICAL DATA
Voltage
100-110 VAC~, 50/60 Hz or
220-240 VAC~, 50/60 Hz
Max. current consumption
100 VAC~
110 VAC~
220-240 VAC~
10.5 A
12.0 A
5.3 A
Rated input of device
100-110 VAC~
220-240 VAC~
1000 W
1000 W
Power Cord
6 m long, 3 x 1.5 mm²
Max. operating pressure
207 bar (20.7 MPa)
Max. volume flow
2.0 l/min
Volume flow at 12 MPa
(120 bar) with water
1.60 l/min
Max tip size
0.021 inch – 0.53 mm
Max. temperature of the coating material
43°C
Max viscosity
20.000 MPa·s
Weight
13.6 kg
Special high-pressure hose
6,35 mm, 15 m - 1/4” - 18 NPSM
Dimensions (L X W X H)
441 x 324 x 415 mm
Sound pressure level*
80 dB (A); Uncertainty K = 4 dB
Sound pressure output*
93 dB (A); Uncertainty K = 4 dB
Oscillation level*
< 2.5 m/s²; Uncertainty K = 1.5 m/s²
* Measured in accordance with EN 62841-1
4.4
TRANSPORTATION IN VEHICLE
Secure the unit with a suitable fastening.
5
STARTING OPERATION
5.1
HIGH-PRESSURE HOSE, SPRAY GUN AND
SEPARATING OIL
1.
If equipped, screw the pressure gauge (1) to the coating
material outlet (Fig. 2, Item 2).
2.
Screw the high-pressure hose (3) to the coating material
outlet (Fig. 2, Item 4).
3.
Screw the spray gun (5) with the selected tip onto the
high-pressure hose.
4.
Tighten the union nuts at the high-pressure hoses firmly
so that coating material does not leak.
1
4
2
3
5
5.
Fill the oil cup with EasyGlide (Fig. 3). Do not use too
much EasyGlide, i.e. ensure that no EasyGlide drips into
the coating material container.
Attention
EasyGlide prevents increased wear and tear to
the packings.
1
6.
Fully depress the pusher stem (Fig. 3, item 1) to make
sure the inlet ball is free.
Summary of Contents for PROSPRAY 3.20
Page 67: ...67 ProSpray 3 20...
