12
GM 1-350/530
OPERATING MANUAL
VERSION 02/2015
ORDER NUMBER DOC2349369
Metals
Plastics
Carbide
Stainless steel 1.4305 Aluminum
UHMW-PE
Stainless steel 1.4301 Stainless steel 1.4104
5.7.1
MATERIALS OF PAINT-WETTED PARTS
5.7
DATA
5.7.2
PROCESSIBLE MATERIALS
Top-coat paints, primer paints, corrosion protection, textured lacquers, lyes, staining solvents, clear lacquers,
separating agents, etc. with a solvent or water base. If you want to spray working materials other than the
aforementioned, please contact a WAGNER representative.
Note:
Please contact your local WAGNER dealer and the lacquer manufacturer if you encounter application problems.
Order No.
Designation
1
2355332
CE Declaration of Conformity
1
2348756
Operating manual, German
1
See Chapter 1.3
Operating manual in local language
For special versions the delivery note applies.
The standard equipment for spray guns includes:
Airless manual gun
Description
Devices
GM 1-350
GM 1-530
Maximum product pressure
MPa; bar; psi
35; 350; 5076
53; 530; 7687
Fluid inlet
inch
NPSM 1/4"
Filter *
Mesh
50, 100, 150, 200
Weight
g; oz
511 g; 18.0 oz
581 g; 20.5 oz
pH range of the product
pH
3.5 – 9.0
Maximum product temperature
°C; °F
85; 185
Sound level at 12 MPa; 120 bar;
1,740 psi product pressure**
dB(A)
75
Storage conditions
°C; °F
-20 – 60 ; -4 – 140
Installation conditions
°C; °F
0 – 40; 32 – 132
Relative humidity at the storage or
assembly location
%
10 – 95
Dimensions
mm; inch
Length: 163; 6.42
Height: 195; 7.68
Width: 39; 1.54
* For
fi lter sizes, see Chapter 13.2
** A-rated sound pressure level of emissions measured at a distance of 0.5 m, Lpa0.5m, in accordance with
DIN EN 14462: 2005.
5.7.3
TECHNICAL DATA
