7
OPERATING MANUAL
VERSION 07/2017
ORDER NUMBER DOC 2349369
3.4
EXAMPLE TYPE PLATE: PROTEC GM 1-530
Designation
1 Wagner International AG
2 Serial number
3 Production date (month/year)
4 Spray gun designation
5 Maximum product pressure
6 Maximum product temperature
7 * Keep clear of nozzle
8 * Maximum product pressure
9 * Injection hazard
10 Warning
11 Skin injection hazard/Read
instruction manual
12 Fire and explosion hazard/read
operating manual
13 "Warning – Hot surface!"
* For nozzle holder PT-HD GM1
Wagner Int. AG
CH-9450 Altstaetten
Serial-No. XXXXX
MM/JJ
SWISS MADE
WARNING
SKIN INJECTION HAZARD
READ INSTRUCTION MANUAL
II 2G X
1
11
10
B_06752
PROTEC
GM 1-530
MAX WPR
530 bar
7700 psi
MAX TEMP
85 °C
185 °F
5
6
4
FIRE AND EXPLOSION HAZARD
READ INSTRUCTION MANUAL
12
KEEP CLEAR OF TIP
7
53 MPa 7700 psi
8
INJECTION HAZARD
9
13
2
3
4
BASIC SAFETY INSTRUCTIONS
4.1
SAFETY INSTRUCTIONS FOR THE OPERATOR
Keep this operating manual at hand near the device at all times.
Always follow local regulations concerning occupational safety and accident
prevention.
4.1.1 ELECTRICAL DEVICES AND EQUIPMENT
Electric shock hazard!
Danger to life from electric shock
Prepare device in accordance with the local safety requirements with regard to the
operating mode and ambient influences.
May only be maintained by skilled electricians or under their supervision. With open
housings, there is a danger from line voltage.
Operate device in accordance with the safety regulations and electrotechnical
regulations.
Must be repaired immediately in the event of problems.
Decommission if it poses a hazard or is damaged.
Must be de-energized before work is commenced. Inform staff about planned work.
Observe electrical safety regulations.
Ground all devices to a common grounding point.
Only operate the device with a properly installed socket with a protective ground
wire connection.
Keep liquids away from electrical devices.
