7
Pump-Runner
3. Change of workplace
1) Fill the Pump-Runner reservoir with about 1.5 litres of water
up to the marking on the inside and close it.
For horizontal transport, the small opening in
the lid with the return hose must be closed.
Cleaning the Pump-Runner
Attention
The Pump-Runner is only solvent resistant
to a limited extent.
Do not place seals in solvent, just wipe
them.
1) Flush out the reservoir with warm water and commercial
household cleaner.
2) Flush out the reservoir with warm water and commercial
household cleaner.
3) Thoroughly clean the catches to guarantee a seal.
4) Wipe the outside of the Pump-Runner if required.
Accessories/Spare parts
Order
Ref.
Description
0508 620
2303 130
2303 125
EasyClean cleaning and conservation agent
118 ml
Lid complete inc. internal seal, return hose seal
and hose clip
Reservoir complete inc. catch set
GB
