Operating manual Manual Powder System SPRINT XE
5 Description
20
Order number 2354920 | Edition 01/2023
Electrical:
Mains (AC)
90 VAC – 250 VAC
Frequency
47 Hz – 63 Hz
Input power
maximum 110 W
Mains (AC) output terminal
Vibrator motor, maximum 70 W
Output voltage of gun
maximum 22 Vpp
Output current of gun
maximum 0.9 A
Corona current limitation
5 μA – 120 μA (adjustable in 1 µA steps)
Tribo current limitation
greater than 12 μA
(EX: switching off of the unit)
Pneumatic:
Compressed air connection
G1/4
"
Connection hose diameter
18.5 x 12.5 mm
Input air pressure
0.6 – 0.8 MPa; 6 – 8 bar; 87 – 116 psi
Air flow
maximum 15 m
3
/h; 529.63 cf/h
Sum of dosing and feed air
2 – 12 m
3
/h; 70.6 – 423.7 cf/h
Gun air
0.05 – 4.5 m
3
/h; 1.765 – 158.9 cf/h
WAGNER injector type
PI-F1, HiCoat ED pump F, PI-F1-S
Required compressed air quality as per
ISO 8573.1
6.5.2 according to ISO 8573.1, 2010
WARNING
Exhaust air containing oil!
Risk of poisoning if inhaled.
Insufficient paint application quality.
4
The compressed air must meet the following quality requirements: (Quality
Standard 6.5.2 according to ISO 8573.1, 2010) 6.5.2 = particle density ≤ 5 mg/m³;
pressure dew point ≤ +7 °C; oil content ≤ 0.1 mg/m³
Ambient conditions:
When using low-melting powder varieties, an ambient temperature below 30 °C (86 °F) may
be necessary.
Volume measures:
for volumes specified in Nm
3
(standard cubic meters). One cubic meter of gas at 0 °C and
1.013 bar is referred to as a normal cubic meter.
Advertisements:
High voltage
0 – 100 kV resolution 10 kV
Corona current
0 – 120 µA resolution 5 – 20 µA
Tribo current
0 – 5 µA resolution 0.5 µA
Recipes
50 preset
Switch over from Tribo to Corona
Automatic
Connectable spray gun types
WAGNER guns PEM-X1,
PEM-C4, PEM-C4-Ergo,
PEM-C4-Ergo FM, PEM-T3
