35
TempSpray-H326 / -H226 / -H126
1
GB
3.3
TRANSPORT
TempSpray-H326 and TempSpray-H226:
Roll up the high-pressure hose and fix to the hose guide park
fitting. Coil connecting hose over the cable holder and con-
nect it to the park fitting as well. Roll up the mains connection
cable onto the cable holder.
Pull the locking pins (Item 1) on both sides of shaft. The lock-
ing pins can be arrested by a small turn (left or right). Pull the
shaft out and deblock the locking pins. A light pull or push will
help to lock the pins well.
Carry the device – don’t throw it!
DESCRIPTION OF UNIT
TempSpray-H126:
Roll up the high-pressure hose (roll diameter greater than 20 cm).
Then roll up the power cord as well. The advice can be
transported with the Airless-unit on which it is mounted (See
details for transport of the Airless-unit).
