Installation Pipe System
TITANUS
SUPER·SENS
®
6
– 14
Data: 02/09
TSS_06_A-en-e
6.7
Noise
suppressor
TITANUS
®
PG-screw joint
noise suppressor
jac k s
pipe adapter
blind plug
Fig. 6. 10: Mounting of noise suppressor
n
The pipe adapter for the noise suppressor is mounted onto the air
outlet openings of TITANUS
®
. To fix the pipe adapter use the two
jacks next to the air outlet openings.
Mount the pipe adapter with sealing by means of the two screws.
o
Pass the pipe (
∅
25mm) through the opened feed-through in the
protection grid and fix it with the existing pipe collar in the air outlet
of TITANUS
®
. As the air return pipe fits exactly into the exit air open-
ing, a tight fit is ensured.
p
Use the sound suppressor’s PG29 screw connection in order to
connect the noise suppressor to the pipe.
q
When installing the absorbing duct, ensure that the direction of air
flow is shown at the side of the housing’s bottom part.
r
Screw the bottom part of the housing directly to the wall.
s
Close the second PG-screw joint through a blind plug.
Installation material
Noise suppressor
cylinder or flat-head screws
– thread diameter: max. 4 mm
– head diameter: 5 to 7 mm