Installation
TITANUS
SUPER·SENS
®
5
– 2
Data:
02/09
TSS_05_A-en-e
5.2 Opening the TITANUS
®
air sampling
smoke detection system
Fig. 5.1: Opening the
TITANUS
®
air sampling smoke detection system
The components on the base board are not allowed to be touched with-
out an antistatic set (except for DIL-switches and buttons)!
Antistatic set
ESD- protective mat set, e.g. type 8531
(art.-no. 85-20-4900)
In order to open TITANUS
SUPER · SENS
®
follow the steps below (refer
to
0H
Fig. 5.1).
Loosen the four screws on the housing lid and lift the lid carefully.
Pull the cable off the display board. Now remove the lid.
ATTENTION