26
W 600 Flexio 18V
EN
Problem
Problem
Cause
Cause
Remedy
Remedy
Too much fog of
coating material
(Overspray)
•
Distance to the object too large
•
Too much coating material
applied
•
Amount of air too high
•
Reduce distance
•
Reduce the material
volume
•
Decrease air quantity
Paint in the
ventilating hose
•
Diaphragm soiled
•
Diaphragm defective
•
Clean the diaphragm
•
Replace the diaphragm
Poor covering
capacity on the wall
•
Spray material is too cold
•
Highly absorbent surface or paint
with poor covering capacity
•
Distance too large
•
The material you are
spraying should be at
room temperature
•
Cross spray (Fig. 13)
•
Closer to the object
25. Technical Data
Technical Data*
Max. viscosity (Interior wall paint/Wall Extra
I-Spray spray attachment):
4000 mPas
Rechargeable battery (PBA 18 V, 2.5 Ah):
Li-Ion, 18 V , 2.5 Ah
Atomizing output:
200 W
Max. flow rate (Interior wall paint/Wall Extra
I-Spray spray attachment):
500 ml/min
Charger (AL 1810 CV):
Input voltage
Output voltage
Charging current
220-240 V
~
, 50-60 Hz;
14.4-18 V
1000 mA
Protection Class (charger):
/ II
Charging time:
approx. 120 min (80%), 154 min (100%)
Size of project:
Varnishes
Paint
Wall paint
approx. 30 m fence
approx. 9 doors
approx. 26 m² wall
Sound pressure level**:
79 dB (A); Uncertainty K = 3 dB
Sound pressure output**:
90 dB (A); Uncertainty K = 3 dB
Oscillation level**:
< 2.5 m/s²; Uncertainty K = 1.5 m/s²
Weight:
Rechargeable battery
Total
0.37 kg
1.7 kg
* When using a PBA 18 V, 2.5 Ah battery and a charger AL 1810 CV
** Measured in accordance with EN 62841-1
Summary of Contents for W 600 FLEXIO 18V
