15
W 610
GB
Technical Data
Max. viscosity:
110 DIN-s
Power source:
230 V ~
Power consumption:
300 W
Atomizing output:
75 W
Double insulation:
Sound pressure level:
81 dB (A)
Oscillation level:
< 2.5 m/s²
Air hose length:
1.8 m
Weight:
approx. 1.7 kg
Description (Fig. 1)
1 Air cup
10 Carrying belt
2 Nozzle
11 Air filter
3 Union nut
12 Mains lead
4 Gun body standard spray attachment 13 Spray gun holder
5 Trigger guard
14 Container
6 Material volume regulation
15 Ventilating hose
7 Handle
16 Valve
8 ON/OFF switch
17 Stir stick
9 Air hose
Coating Materials Suitable for Use
Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes,
automotive finishes, staining sealers and wood sealer-preservatives.
All coating materials with the red Perfect Spray logo.
Coating Materials Not Suitable for Use
Wall paints without the red Perfect Spray logo.
Alkali and acidic paints. Coating materials with a flash point below 21°C.
Preparation of the Coating Material
The enclosed spray attachment can be used to spray paints, varnishes and glazes that are
undiluted or slightly diluted. Detailed information is available in the technical data sheet
of the manufacturer (
Internet Download).
Stir the material up and put the required amount into the paint container.
1.
Thinning recommendation
Sprayed material
Glazes
undiluted
Wood preservatives, mordants, oils, disinfection agents,
plant protective agents
undiluted
Paints containing solvents and water-soluble paints,
primers, vehicle coating paints, thick-film glazes
dilute by 5 - 10 %
