background image

3

W 690 Flexio Extra Spray Kit

AUS

heat, oil, sharp edges or moving tool parts.

 Damaged or twisted leads increase the 

risk of an electric shock. 

e) If you work outdoors with a power tool, only use extension cables suitable for 

outdoor use. 

The use of an extension lead that is suitable for outdoors reduces the risk 

of an electric shock.

 

f) If you cannot avoid using the tool in a damp environment, use a residual current 

operated circuit-breaker. 

Using a residual current operated circuit-breaker avoids the 

risk of electric shock.

g) It is recommended that the tool always be supplied via a residual current device 

having a rated residual current of 30 mA or less.

3. Safety of Persons 

a) Be attentive. Pay attention to what you are doing and work sensibly with a 

power tool. Do not use the tool if you are tired or under the influence of drugs, 

alcohol or medication. 

Just a moment of inattentiveness while using the tool can lead 

to serious injuries.

 

b) Wear personal safety equipment and always wear safety goggles 

Wearing 

personal protective equipment, such as dust mask, non-slip safety shoes, safety helmet 

or ear protection, depending on the type of power tools, reduces the risk of injury. 

c) Avoid accidental starting-up. Make sure that the electric tool is switched off 

before you connect it to the power supply, pick it up or carry it. 

Accidents can 

occur if you carry the power tool while your finger is on the switch or if you connect the 

power tool to the power supply which it is on. 

d) Remove setting tools or wrenches before switching on the power tool. 

A tool 

or wrench that is in a rotating tool part can lead to injuries. 

e) Avoid an unnatural posture. Ensure that you are standing securely and have your 

balance at all times. 

This ensures that you can control the tool better in unexpected 

situations. 

f) Wear suitable clothing. Do not wear wide clothing or jewellery. Keep your hair, 

clothes and gloves away from moving parts. 

Loose clothing, jewellery or long hair 

can be caught in moving parts. 

g) Do not lull yourself into a false sense of security and do not think yourself above 

the safety rules for electric tools, even if you are familiar with the electric tool 

following extensive practical experience.

 Careless use can lead to serious injuries 

in fractions of a second.

Summary of Contents for W 690 Flexio



























Reviews: