WAGNER W 690 Flexio, Operating Instructions Manual

13

W 690 Flexio Extra Spray Kit

AUS

the air filter compartment (Fig. 26, A). Replace both air filters (Fig. 26, B).  Close the cover 

of the air filter compartment.

Ventilating hose / Valve (Wall Extra I-Spray spray attachment)

• 

Pull the ventilating hose (Fig. 18, A) at the top from the gun body. Screw off the valve 

cover (B). Remove the diaphragm (C).

 Carefully clean all parts or replace in the event 

of damage.

• 

Place the diaphragm (Fig. 18, C) 

with the pin facing upwards

 on the bottom section of 

the valve. Also see the marking on the gun body. 

• 

Place on the valve cover (Fig. 18, B) and screw it closed. 

• 

Place the ventilating hose (Fig. 18, A) on the valve cover and on the nipple at the gun body.

Ventilating hose / Valve (Gravity spray attachment)

• 

Remove the hose, dismantle it and remove the membrane (Fig. 18, D).

• 

Carefully clean all parts or replace if required.

• 

During assembly, insert the membrane (fig. 18, D) with the pin pointing downwards. 

19. Spare Parts

Spare Parts List Gravity spray attachment (Fig. 27)

Pos. Designation

Order No.

Gravity spray attachment complete with container (600ml and 

150 ml)

2414024

1

Union nut

2410212

2

Air cap 

2361747

3

Nozzle

2361238

4

Seal

0417 706

5

O-ring of spray attachment

2362 875

6

Ventilation hose with valve

2410217

7

Container with cover 600 ml

2410208

8

Container with cover 150 ml

2410210

Spare Parts List Wall Extra I-Spray spray attachment (Fig. 28)

Pos. Designation

Order No.

Wall Extra I-Spray spray attachment complete with 1800 ml 

container

2361 749

1

Air cap

2382 753

2

Union nut and nozzle

2382 751

3

O-ring of spray attachment

2362 875

4

Ventilating hose, valve cover, diaphragm

2382 754