background image

17

W 690 Flexio Extra Spray Kit

AUS

electric tool is actually in use, depending on how the electric tool is being used. It is 

necessary to specify safety measures to protect the operating personnel. These measures 

are based on an estimated shutdown during the actual conditions of use (all parts of the 

operating cycle are taken into consideration here, for example periods when the electric 

tool is switched off, and, when it is switched on but running without any load).

3+1 years guarantee

The guarantee runs for three years, counting from the date of sale (sales slip). The 

guarantee is extended by a further 12 months if the device is registered online within 

4 weeks of the purchase at www.wagner-group.com/3plus1. Registration is only 

possible if the buyer is in agreement with the data being stored that is entered during 

registration. The guarantee covers and is restricted to free-of-charge rectification 

of faults which are demonstrably attributable to the use of faulty materials in 

manufacture, or assembly errors; or free-of-charge replacement of the defective parts. 

The guarantee does not cover incorrect use or commissioning or fitting or repair work 

which is not stated in our operating instructions. Wearing parts are also excluded from 

the guarantee. The guarantee excludes commercial use. We expressly reserve the right 

to fulfil the guarantee. The guarantee expires if the tool is opened up by persons other 

than WAGNER service personnel. Transport damage, maintenance work and loss and 

damage due to faulty maintenance work are not covered by the guarantee. Under 

any guarantee claim, there must be proof of purchase of the tool through submission 

of the original receipt. Wherever legally possible, we exclude all liability for injury, 

damage or consequential loss, especially if the tool has been used for a purpose other 

than that stated in the operating instructions, commissioned or repaired other than 

in accordance with our operating instructions or if repairs are performed by someone 

who is unqualified. We reserve the right to perform any repairs in excess of those 

stated in our operating instructions. In case of guarantee or repair, please refer to your 

point of sale.

EU Declaration of conformity

We declare under sole responsibility that this product conforms to the following 

relevant stipulations:  

2006/42/EC, 2014/30/EU, 2011/65/EU, 2012/19/EU 

Applied harmonised norms:  

EN 60745-1, EN 50580, EN 62233, EN 55014-1, EN 55014-2, EN 61000-3-2:, EN 61000-3-3 

Summary of Contents for W 690 Flexio



























Reviews: