GB
31
W 690 Flexio
4) Push the nozzle seal (fig. 19, 6) over the needle (7); the groove (slot) should point
towards you.
5) Place the nozzle (fig. 19, 5) on to the gun body with the recess facing downwards.
Attention: Position of needle must be congruent with the nozzle aperture. (Fig.20)
6) Put the air screen (fig. 21, 4) in the air cap (3). Put both on the nozzle (5) and secure
with the union nut (2).
7) Adjust the setting ring (fig. 22, 1) so that the two "horns" grip the air cap and the red
adjustment lever rests on the pin.
8) Place the container seal from below on the suction tube and slide it over the collar,
while turning the container seal slightly.
9) Insert the suction tube with container seal in the gun body.
20. Maintenance
Replace the air filters depending on soiling. Unplug the power plug. Open the cover of
the air filter compartment (Fig. 23, A). Replace both air filters (Fig. 23, B). Close the cover
of the air filter compartment.
WARNING!
Never operate the machine without the air filter; dirt could be sucked in
and interfere with the function of the machine.
In order to mount the gun more easily apply lubricating grease (enclosed) liberally
to the O-ring at the spray attachment (Fig. 16, A).
21. Spare Parts
Spare Parts List Standard spray attachment (Fig. 24)
Pos. Designation
Order No.
Standard spray attachment complete with 800 ml container
2361 730
1
Union nut
2362 873
2
Air cap
2362 877
3
Nozzle
2362 878
4
Nozzle seal
0417 706
5
O-ring of spray attachment
2362 875
6
Ventilating hose, valve cover, diaphragm
2304 027
7
Suction tube
2362 876
8
Container seal
2323 039
9
Container with cover 800 ml
0413 909
Summary of Contents for W 690 Flexio
