Spray gun W 90
11
GB
Caution!
When using power tools, the following basic safety
measures are to be taken as protection against electric shock,
personal injury and risk of fire.
Read the operating instructions before using the equipment and
observe the safety instructions. Keep the operating instructions in a
safe place.
Caution! Clean the spray gun thoroughly after each use.
Malfunctions can develop in spray guns that have not been
cleaned! The guarantee does not apply to malfunctions
caused by contamination; therefore
clean
the spray gun
and check it again before sending it to your customer
service centre.
Safety Instructions for Spray Guns
1. Spray material emerges from the nozzle under high pressure.
Caution!
Danger of injection – do not point the spray stream at
people or animals. In the event of injury to the skin by paint
or solvents, quick expert treatment by a physician is
essential. The physician should be informed of the type of
paint or solvent involved.
2. The spray gun is to be used only for paints and solvents and other
liquids with a 21° C flashpoint or higher (See information on the
material tin. Hazard class A II and A III permitted).
3. The spray guns are not to be used in work places covered by Ex-
protection regulations.
4. To avoid the hazard of explosion when spraying, provide for
effective natural or artificial ventilation.
5. No sources of ignition are to be in the immediate area when
spraying, e.g. open flame, the smoking of cigarettes, sparks,
glowing wires and hot surfaces.
