background image

GB

16

W 95

2 - Year Guarantee

The warrantee is valid for two years, starting on the day of sale (receipt). It includes and is limited to

elimination of the defect, proven to have been caused by inferior production materials or

mistakes during assembly, free of charge or replacement of the defective parts. Use, start-up or 

do-it-yourself assembly or repairs which are not listed in our operating instructions are not covered
by the warrantee. Parts subject to wear are also excluded from the warrantee. The warrantee does
not cover commercial use. We reserve the exclusive right to make judgements on warrantee 
obligations.The warrantee is void if the unit was opened by persons other than WAGNER Service
personnel. Transport-related damage, maintenance work and damage and malfunctions caused by
improper maintenance work are not covered by the warrantee. For implementation of the 
guarantee, proof of purchase of the unit must be provided, i.e. submitting the original receipt. To the
fullest legal extent possible, we are not liable for any personal, material or consequential damages,
especially those resulting from use of the unit other than as intended in the operating instructions,
start-up or repair in a manner other than described in our operating instructions or repairs performed
by a non-professional. Repairs going above and beyond those dealt with in these operating 
instructions are reserved for our factory. 

In case of guarantee or repair, please refer to your point of sale.

Warning

If the supply cord of this appliance is damaged, it must only be
replaced by a repair shop appointed by the manufacturer, be-
cause special purpose tools are required. 

Warning:

Do not connect the blue or brown wire to the earth

terminal of the plug! The wires in this mains lead are coloured in
accordance with the following code:

blue

= neutral     

brown

= live

As the colours of the wires in the mains lead of this appliance
may not correspond with the coloured markings identifiying the
terminals in your plug, proceed as follows:

Should the moulded plug have to be replaced, never re-use
the defective plug or attempt to plug it into a different 13 A
socket. This could result in an electric shock.

Should it be necessary to exchange the fuse in the plug only
use fuses approved by ASTA in accordance with BS 1362. 5
Amp fuses may be used.

To ensure that the fuse and fuse carrier are correctly mounted
please observe the provided markings or colour coding in the
plug.

After changing the fuse, always make sure that the fuse car-

rier is correctly inserted. With out the fuse carrier, it is not per-
missible to use the plug.

The correct fuses and fuse carriers are available from your
local electrical supplies stockist.

Summary of Contents for W 95















Reviews: