D
43
W 990 Flexio
GB
43
W 990 Flexio
15.
Selecting the Spray Setting
WARNING! Danger of injury!
Never pull the trigger guard while
adjusting the air cap.
2 different spray jet shapes can be set by turning
the adjustment ring (fig. 16, 1).
Fig. 17 A
=
vertical flat jet
Æ
for horizontal surfaces
Fig. 17 B
=
horizontal flat jet
Æ
for vertical surfaces
Tighten the union nut (Fig. 16, 2) fully
so that no paint is able to penetrate
the device. Check regularly whether
the union nut has worked loose
during operation.
16.
Setting the width of the
spray jet
Use the red adjustment lever (fig. 18, 1) to also
switch between a wide (
) and a narrow (
)
spray jet.
헃
A
B
1
헄
헂
1 2