GB
10
W 180P
Cleaning and Maintenance
The spray gun can only operate satisfactorily if it is cleaned and preserved after each
use.
Attention!
Never immerse the spray gun in liquid when cleaning.
1 Empty out the remaining paint from the container.
2. Put proper thinner in the container and trigger the sprayer for approx. 2 seconds.
3. Pull the main plug out of the socket.
4. Disassemble the spray gun as shown in
Illus. 9
(spare parts).
5. Thoroughly clean all soiled parts.
6. Reassemble the parts in reverse order.
7. Put a few drops of oil (e.g. sewing machine oil) in the intake and runback holes
(
Illus. 7, arrow
). Briefly switch on the spray gun.
Flexible Nozzle Extension (Illus. 4 + 8)
For spraying ceilings, resting objects or hard-to-reach areas e.g. radiators.
Spare Parts List W 180 P
Pos
Name
Order No.
1
Suction tube
0413 305
2
Paint container with cover
0413 909
3
Nozzle 0,8 mm
0046 903
4
Locking nut
0413 310
5
Valve
0209 042
6
Pump housing
0413 202
7
Piston spring
0033 028
8
Piston
0198 207
9
Nozzle spanner
0199 327
10
Viscosity measuring cup (small)
0209 058
Accessories W 180 P
Designation
Order No.
Round spray nozzles for various spray materials:
Thick spray materials / nozzle size: 1,0
0046 906
Very thin spray materials / nozzle size: 0,5
0046 894
Paint container with cover
0413 909
Needle-jet nozzle
0209 045
Flexible nozzle extension with atomiser
0046 675
