GB
11
Important Note Regarding Product Liability!
Using other accessories and spare parts can lead to partial or total loss of liability and
guarantee claims. With original WAGNER accessories and spare parts, you have the
guarantee that all safety regulations are fulfilled.
W 180P
Malfunction
Cause
Correction
Spray gun buzzes and does
Piston stuck
Disassemble pump and
not work
clean with thinner
Defective drive
Send spray gun to customer
service center
Spray gun does not suck in
No valve in the pump
Insert valve
Suction tube loose in the conical
bore
Adjust suction tube
Venting hole in pump housing
clogged
Clean
Intake hole (fitting) in pump
housing logged
Clean
Viscosity of spray material too high
Thin accordingly
Spray gun sucks in but does
Nozzle clogged
Clean
not spray
Ducts and holes in atomiser clogged Clean
Spray gun works but sprays
Spray material in container running
unevenly
out Refill
Spray gun held inclined leading to
Use flexible nozzle
sucking in of air
extension (see accessories)
Viscosity of spray material too high
(too thick)
Dilute accordingly
Fine adjustment button not set
Reset according to spray
correctly
material
Wrong nozzle size
Change nozzle
Nozzle worn out
Replace
Valve worn out
Replace
Wrong valve inserted
Use correct valve