13
W 450 SE
GB
the tool function is impaired.
Have damaged parts repaired before using the tool.
Many accidents have their origin in power tools that have been maintained badly.
Use the power tool, accessories, insert tools, etc. in accordance with these
f)
instructions and in a fashion specified for this special tool type. Take the
working conditions and the activity to be carried out into consideration.
The
use of power tools for purposes other than the intended ones can lead to dangerous
situations.
5. Service
Have your tool repaired only by qualified specialist personnel and only with
a)
original spare parts.
This ensures that the tool safety is maintained.
If the supply cord is damaged, it must be replaced by the manufacturer or it’s
b)
service agent or a similarly qualified person in order to avoid a safety hazard.
Safety Instructions for Spray Guns
Attention! Danger of injection
Spray materials emerge from nozzle tips under high pressure.
Never point the spray stream towards human beings or animals.
Caution! Wear breathing equipment: Paint mist and solvent vapors are
damaging to health. Always wear breathing equipment and only work in
well ventilated rooms or using supplementary ventilating equipment. It
is advisable to wear working clothing and gloves.
Wear a breathing mask and ear protection.
•
The spray gun is to be used only for paints and solvents with a 21° C (32° in UK) flashpoint
•
or higher (See information on the material tin. Hazard class A II and A III permitted).
The spray gun is not to be used in work places covered by Ex-protection regulations.
•
To avoid the hazard of explosion when spraying, provide for effective natural or
•
artificial ventilation.
No sources of ignition are to be in the immediate area when spraying, e.g. open flame,
•
cigarettes, sparks, glowing wires and hot surfaces.
The spray gun is not a toy; children must therefore not be allowed to handle it or play
•
with it.
Before carrying out any work on the spray gun, unplug the lead from the power
•
socket.
Do not use spray guns to spray flammable liquids.
•
The spray guns are not to be cleaned with flammable solvents which have a flashpoint
•
under 21°C.
Take precautionary measures against potential hazards from the spray liquid and
•
follow any instructions given on containers or laid down by the manufacturer of the
liquid.
Do not spray any liquid of unknown hazard potential.
•
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fulfilled.