D
35
W 950 Flexio
G
ener
al
GB
35
W 950 Flexio
5. Service
a) Have your tool repaired only by qualified specialist personnel and only with
original spare parts.
This ensures that the tool safety is maintained.
b) If the supply cord is damaged, it must be replaced by the manufacturer or it’s
service agent or a similarly qualified person in order to avoid a safety hazard.
3. Safety instructions for colour application devices
•
Caution!
Wear breathing equipment: Paint mist and solvent vapors are damaging to
health. Always wear breathing equipment and only work in well ventilated rooms or
using supplementary ventilating equipment. It is advisable to wear working clothing,
safty glasses, ear protection and gloves.
CAUTION: DANGER OF INJURY!
Never point the spray lance at people or animals.
Sockets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket!
•
Flammable agents may not be used for spraying with this device.
•
The device may not be cleaned using flammable solvents.
•
Caution against dangers that can arise from the sprayed substance and observe the
text and information on the containers or the specifications given by the substance
manufacturer.
•
Do not spray any liquid of unknown hazard potential.
•
The device may not be used in establishments that are subject to explosion
prevention regulations.
•
In order to avoid risk of an explosion during spray operations, excellent natural or
artificial ventilation must be provided.
•
While spraying there may be no ignition source in the surrounding area, for example,
open fire, cigarette smoke, sparks, red-hot wires and hot surfaces.
•
Ensure that no solvent vapors are sucked in by the unit. Do not spray onto the unit!
•
The device is not a toy. For this reason do not allow children to handle or play with the
device.
•
Before working on the device, remove the power plug from the socket.
•
Mask all areas that are not going to be sprayed. When working keep
in mind that wind, for example, may transport paint mist over great
distances and cause damage.
•
Always switch off the device before placing the spray lance in the holder.
•
The spray attachment for varnish paints and glazes may only be
operated in conjunction with a fully functioning valve.
If paints rises in
the ventilating hose (A) do not operate the unit further!
Dismantle
and clean the ventilating hose, valve and diaphragm and replace the
diaphragm if necessary.
A
Summary of Contents for W950 Flexio
Page 1: ...wagner group com D GB NL F UNIVERSAL SPRAYER W 950 FLEXIO ORIGINAL BETRIEBSANLEITUNG...
Page 2: ...W 950 Flexio 126 1 30 D 31 60 GB 61 92 F 93 122 NL Fragen Questions Des questions Vragen...
Page 126: ...124 W 950 Flexio 124 W 950 Flexio...
Page 127: ...125 W 950 Flexio 125 W 950 Flexio...
