D
43
W 950 Flexio
W
all pain
t
GB
43
W 950 Flexio
i
The spray jet can pulsate when very liquid materials are being used.
However, this does not usually have a negative eff ect on the results.
i
If the work being performed is of a sophisticated nature (e.g. the borders
around plugs) do not pull the trigger through completely. This prevents the
feed pump from being switched on and the only material that is sprayed is
the material that is already in the system. If this starts to run out, briefl y pull
the trigger completely in order to refi ll the system.
i
"Cross spray" when using paint with a
poor covering capacity or if the surface
is highly absorbent (Fig. 8).
i
Interior wall paint in strong colour
shades should be applied at least twice
(allow fi rst paint coat to dry fi rst). This
will ensure good coverage.
17.
Interruption of Work
•
Turn the machine off . (Set the multifunction switch to "OFF")
•
Put the spray lance in the holder.
•
Wet paint surface in paint container with a little water to prevent a skin from forming.
•
Clean nozzle openings after an interruption in operation.
18. Switching off and cleaning the spray lance
Proper cleaning is the prerequisite for problem-free operation of the paint application
device. No warranty claims are accepted in case of improper or no cleaning.
i
We recommend using hot water for cleaning purposes.
•
Turn the machine off . (Set the multifunction switch to "OFF")
•
Remove the suction hose from the paint container.
•
Set the multifunction switch to "FILL/CLEAN".
Summary of Contents for W950 Flexio
Page 1: ...wagner group com D GB NL F UNIVERSAL SPRAYER W 950 FLEXIO ORIGINAL BETRIEBSANLEITUNG...
Page 2: ...W 950 Flexio 126 1 30 D 31 60 GB 61 92 F 93 122 NL Fragen Questions Des questions Vragen...
Page 126: ...124 W 950 Flexio 124 W 950 Flexio...
Page 127: ...125 W 950 Flexio 125 W 950 Flexio...
