WAGNER WallPerfect I-Spray 1800, Manual

GB

10

WallPerfect I-Spray 1800

Assembly

i

The I-Spray nozzle, air cap and needle are optimally adjusted to suit each 

other. Do not combine components with different spray attachments, as the 

components could be damaged.

CAUTION! The units may only be used with a functional valve. If paints 

rises in the ventilating hose (Fig. 1 A, item 15) do not operate the unit 

further! Dismantle and clean the ventilating hose, valve and diaphragm 

and replace the diaphragm if necessary.  

Spritzpistole nicht legen! 

1.  Place the diaphragm (fig. 1 A, 17) 

with the pin facing upwards

 on the bottom section 

of the valve. Also see the marking on the gun body.

2.  Place on the valve cover (fig. 1 A, 16) and screw it closed. 

  P

3.  lace the ventilating hose (fig. 1 A, 15) on the valve cover and on the nipple at the gun 

body.

4.  Slide  the  nozzle  seal  with  the  groove  (slot)  facing  forwards  into  the  nozzle  

(Fig. 7).

  Place the nozzle on to the gun body with the recess facing downwards. 

5. 

Attention: Position of needle must be congruent with the nozzle aperture.  

(Fig. 8)

6.  Put the air cap (fig. 9, 3) onto the nozzle (4) and tighten it using the union nut (2).

  Position the adjustment ring (figs. 10, 1) on the union nut so that the recesses on the 

7. 

adjustment ring can snap into both horns on the air cap.

  Place the container seal from below on the suction tube and slide it over the collar, 

8. 

while turning the container seal slightly.

  Insert the suction tube with container seal in the gun body.

9. 

Spare Parts List (Fig. 1/ 1A)

Pos.

Designation

Order No.

3

Nozzle seal (2 pcs.)

2304 433

4

Nozzle

2328 908

5

Air cap

2328 905

6

Union nut

2328 903

7

Spray jet adjustment ring

2328 900

8

O-ring

0417 308

11

Container seal

2328 919

12

Suction tube

2328 922

13

Container 1800 ml with cover  

(only for WallPerfect spray attachment)

2304 025

14

Feed hopper (3x)

2304 028

15, 16, 17 Ventilating hose, valve cover, diaphragm

2304 027