GB
14
WallPerfect W 665
Take proper care of your tools. Check whether the moving parts function
e)
troublefree and do not jam, whether parts are broken or damaged so that
the tool function is impaired.
Have damaged parts repaired before using the tool.
Many accidents have their origin in power tools that have been maintained badly.
Use the power tool, accessories, insert tools, etc. in accordance with these
f)
instructions and in a fashion specified for this special tool type. Take the
working conditions and the activity to be carried out into consideration.
The
use of power tools for purposes other than the intended ones can lead to dangerous
situations.
5. Service
Have your tool repaired only by qualified specialist personnel and only with
a)
original spare parts.
This ensures that the tool safety is maintained.
If the supply cord is damaged, it must be replaced by the manufacturer or it’s
b)
service agent or a similarly qualified person in order to avoid a safety hazard.
Safety Instructions for Spray Guns
Caution!
•
Wear breathing equipment: Paint mist and solvent vapors are damaging to
health. Always wear breathing equipment and only work in well ventilated rooms or
using supplementary ventilating equipment. It is advisable to wear working clothing,
safty glasses, ear protection and gloves.
CAUTION: DANGER OF INJURY!
Never point the spray stream towards human beings or animals.
The spray gun may only be used to spray materials with a flash point of 21 °C (32°
•
in UK) or higher (See information on the material tin. Hazard class A II and A III
permitted).
Do not use the spray guns to spray flammable substances.
•
The spray guns are not to be cleaned with flammable solvents which have a flashpoint
•
under 21 °C.
Caution against dangers that can arise from the sprayed substance and observe the
•
text and information on the containers or the specifications given by the substance
manufacturer.
Do not spray any liquid of unknown hazard potential.
•
The device may not be used in workplaces covered by the explosion-protection
•
regulations.
To avoid the hazard of explosion when spraying, provide for effective natural or
•
artificial ventilation.
There must be no sources of ignition such as, for example, open fires, smoke of lit
•
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
Ensure that no solvent vapors are sucked in by the unit. Do not spray onto the unit!
•
The spray gun is not a toy; children must therefore not be allowed to handle it or play
•
with it.
Before working on the spray gun remove the power plug from the socket.
•
Cover areas that are
•
not to be sprayed. When working keep in mind that wind, for
example, may transport paint mist over great distances and cause damage.
