15
OPERATING MANUAL
VERSION 01/2013
ORDER NUMBER DOC 2333538
4.2.6
TOUCHING HOT SURFACES
Touch hot surfaces only if you are wearing protective gloves.
When operating the device with a coating material with a temperature of > 43 °C;
109.4 °F:
- Identify the device with a warning sticker "Warning - hot surface".
Order No.
9998910
Instruction sticker
9998911
Protection sticker
Note:
Order the two stickers together.
4.2.5
HANDLING HAZARDOUS LIQUIDS, VARNISHES AND PAINTS
When preparing or working with paint and when cleaning the device, follow the
working instructions of the manufacturer of the paints, solvents and cleaning agents
being used.
Take the specifi ed protective measures. In particular, wear safety goggles, protective
clothing and gloves, as well as hand protection cream if necessary.
Use a mask or a breathing apparatus if necessary.
For suffi
cient health and environmental safety: Operate the device in a spray booth or
on a spraying wall with the ventilation (extraction) switched on.
Wear suitable protective clothing when working with hot materials.
De-energize the device electrically.
Disconnect the pneumatic supply line.
Relieve the pressure from the device.
Ensure that the flash point of the cleaning agent is at least 5 K above the ambient
temperature.
To clean, use cloths and brushes moistened with solvent. Never use hard objects or
spray on cleaning agents with a gun.
Non-combustible cleaning agents should preferably be used.
An explosive gas/air mixture forms in closed containers.
When cleaning devices with solvents, never spray into a closed container.
Use only electrically conducting containers for cleaning liquids.
The containers must be grounded.
4.2.4
CLEANING
