45
OPERATING MANUAL
VERSION 01/2013
ORDER NUMBER DOC 2333538
9.1
HIGH-PRESSURE HOSES
The lifetime of the fl uid hoses is, even with appropriate handling, reduced due to environmental
infl uences.
Check hoses, pipes, and couplings every day and replace if necessary.
As a precaution fl uid hoses should be replaced after a period specifi ed by the plant
operator.
9.2
DECOMMISIONING
When the equipment must be scrapped, please diff erentiate the disposal of the waste
materials.
The following materials have been used:
Steel
Aluminum
Elastomerics
Plastic and
Carbide
The consumable materials (paints, adhesives, sealers, solvents) must be disposed of
according to the valid specifi c standards.
Bursting hose, bursting threaded joints!
Danger to life from injection of material.
Ensure that the hose material is chemically resistant to the
sprayed materials.
Ensure that the spray gun, threaded joints and material hose
between the device and the spray gun are suitable for the
pressure generated in the device.
Ensure that the following information can be seen on the high
pressure hose:
-
Manufacturer
- Permissible operating pressure
- Date of manufacture
DANGER
