2787-2344 (/0000-00x0)
Configuration
44
Product manual | Version: 1.0.1
Power Supply Pro 2
DC Output
Figure 26: Dialog: Settings – DC Output
Table 55: Dialog: Settings – DC Output
Section
Parameters
Description
General
Output on
If this checkbox is selected, the DC output is activated.
Output voltage
Here you can enter the output voltage (unit: mV) that is
present when the output is active.
“active droop” parallel mode
If this checkbox is selected, the “Active Droop” parallel
switching mode is active. In this mode, a smooth char-
acteristic curve ensures better current sharing for par-
allel operation of power supplies.
Enable switching the DC out-
put on and off via cyclic
process data
If this checkbox is selected, the DC output can be
switched on and off via cyclic process data.
Overload behavior
Constant current
If this checkbox is selected, the “Constant Current”
overload behavior is enabled. You can find more infor-
mation in section
8
Constant current (latching
mode)
If this checkbox is selected, the “Constant Current with
Latching Shutdown” overload behavior is enabled. You
can find more information in section
8
